俄罗斯米格飞机制造集团（RSK MiG）的专家，已订约提供技术上的协助给中国设计机构，称增强J-10机身是一个合理的步骤，战斗机最初想要采用以色列Lavi飞机所使用的动力，紧凑的普拉特&惠特尼PW1120发动机，视为J-10的一种基础。
然而，美国施加的出口限制迫使决定去安装重量多出20%的俄国AL-31FN发动机，进气量增加40%，需要一个更大的进气口。
在2005 年后期，中国用于购买第二批AL-31FN发动机下了USD300百万（3亿美元）订单；这些是Su-27战斗机的AL-31F衍生型用于单发战斗机，齿轮箱位于下面位置。在开始，它被认为合同用于采购与2001-02年提供的第一批54台单位相同的发动机，已经安装到发展原型和初期生产的J-10。然而，AL-31FN制造商莫斯科机器生产厂（MMPP）Salyut公司在2005年12月透露了订购的是AL-31FN M1型，声称是一种新的AL-31FN生产规格。
附原文供对照参考：
China working on 'Super-10' advanced fighter
by Henry Ivanov JDW Correspondent
Moscow
China is developing an advanced version of the Chengdu Aircraft Industrial Corporation （CAC） J-10 multirole fighter aircraft, referred to as the Super-10, with a more powerful engine, thrust-vector control, stronger airframe and passive phased-array radar, according to Russian sources.
Russian Aircraft Corporation MiG （RSK-MiG） specialists, contracted to provide technical assistance to Chinese design houses, said the enhancement to the J-10 airframe is a logical step, since the fighter was initially intended to have the compact Pratt&Whitney PW1120 engine that powered the Israeli Lavi aircraft, which served as a basis for the J-10.
However, the imposition of US export restrictions forced the decision to install the 20 per cent heavier Russian AL-31FN engine, which requires a larger intake as it needs 40 per cent more air flow.
In late 2005 China placed a USD300 million order for a second batch of AL-31FN engines; these are a derivative of the Su-27's AL-31F for single-engine aircraft, with a lower positioning of the gearbox. At first, it was believed the contract was for the same engines as in the first batch of 54 units supplied in 2001-02 and installed into development prototypes and initial production J-10s. However, AL-31FN-maker Moscow Machine Production Plant （MMPP） Salyut in December 2005 revealed the order to be for the AL-31FN M1, which is claimed to be a new AL-31FN production standard.
The company's general manager, Yuri Eliseyev, said the new engine was purposely developed for what he referred to as the "Chinese Super-10 fighter". Four such engines have been seen assembled at MMPP Salyut's Moscow production site. One of these has been demonstrated undergoing fire testing, during which its swivel nozzle was deflected up/down and sideways at full power and reheated thrust.
JDW Jan 11, 2006: Super J-10 Fighter
The J-10 was originally designed to use the Zhemchug, a mechanically scanned slotted array by Phazotron, but some critical components were made impossible to copy.
The other Bureau, Tikhomirov, recently resumed a working relationship with the PLAAF, after having submitted an early prototype of their Pero in the late 90s but with no followup by the Chinese. They are now submitting a derivative of the Pero （is this the Panda?）. The Pero was originally designed for use on the Su-30KN.
Recall the recent large order for engines in late 2005. Most observers assumed it was for more of the AL-31FN, but this is not so. It was for a new engine, the AL-31FN-M1. The M1 features an enlarged fan with inlet diameter of 924 mm instead of 902 mm, which improved thrust from 122.6kN to 132.4 kN. Also features a swivel nozzle developed by Salyut in conjunction with Zavod imeni Klimova. Similar to the KliVT used on the RD-33OVT of the Mig-29OVT- it's improved over the IAF's Su-30MKI in that it deflects in BOTH pitch and yaw, rather than pitch only.
Expected to have a MTBF of 1000 hours, the requirement set by the PLAAF （which perhaps will also be the MTB of the WS-10A, if and when it enters service）, and a lifetime of 2000 hours. Future upgrades include the M2 and M3, with the M3 having a new cooling system, combustor, and LP compressor that boost thrust to 142.2 kN, and give it a longer lifetime.
基本要点：
J10最初计划使用珍珠雷达 ,费佐特龙公司的一种机械扫描平板缝隙阵列雷达,但有些评论认为该雷达部件中国无法仿制.
另一设计局,无线电技术设计研究院NIIP,近来恢复了与中国空军的合作关系.在这之前,他们曾在90年代后期向中国提供过他们的Pero雷达的原型样机.现在他们又提供了Pero雷达的发展型.苏30KN最初曾计划使用Pero雷达
回想起2005年晚些时候发动机的大量定购.许多观察家认为很可能是AL31FN,但事实并非如此.这是一种新的发动机AL-31FN-M1.M1的特征是加大进口风扇直径（由902MM增加到924MM）,推力由122.6KN增加到132.4KN.其它的特征是一个由礼炮联合体和克里莫夫合作的全向矢量喷管,类似于克里莫夫用于米格 29OVT的发动机RD33OVT的喷管,该喷管在印度空军的苏30MKI基础上做了改进,能作俯仰和偏航的偏转而不仅仅是苏30MKI的俯仰偏转
中国空军期待该发动机有1000小时的大修间隔（这也可能也是WS10A服役时的大修间隔）和2000小时的寿命.未来的升级包括M2和M3,在M3上将换装新的涡轮冷却系统,燃烧室和低压压气机（风扇）,能使推力增加到142.2KN,并能得到更长的寿命.
- 关键字搜索：
- 简氏
看完这篇文章觉得
排序